Chamberlin Calls - Pinned Bands - Pinned Bands

How to pin bands on barrels

Pinned Bands

< Previous | Next >

The barrel is placed on another mandrel, turned to final shape, and sanded in the same manner as the insert

Turning

The barrel is placed on another mandrel, turned to final shape, and sanded in the same manner as the insert.

A barrel blank is cut to size and then drilled .

The pins are ground down.

The barrel is placed on another mandrel, turned to final shape, and sanded in the same manner as the insert.

This page last modified on December 22, 2022